Review Machine Status Through the Error Information Interface

To check a machine for errors, access its error information interface and review the available details to determine whether the device is functioning properly. You can then send those error details to the technical team to help them diagnose the issue faster. This process involves the device’s debug mode, but non-professionals should not modify any settings while using that mode.

What the Error Information Check Provides

The error information interface is used to check the device’s operating status. Its purpose is to make it possible to determine quickly whether the device is functioning properly. The information available there can also support technical diagnosis when an issue requires review by the technical team.

This procedure is limited to checking the available error information and sharing the details. It does not authorize changing device settings or adjusting the machine’s configuration.

Supported Error-Checking Procedure

Follow the documented actions in order. The specific controls or menu navigation used to enter the device’s debug mode are not stated here, so no additional navigation steps should be assumed.

1. Access the error information interface. This interface provides the information needed to check whether the device is functioning properly.
2. Review the available error information. Use the displayed details to determine the machine’s current operating status.
3. Send the error details to the technical team. Providing the available details can help the team diagnose the issue faster.

Debug Mode Limitation

The error-checking instructions involve entering the device’s debug mode. For non-professionals, debug mode should be used only for the documented checking process. Do not modify any settings within debug mode.

The check is complete when the error information interface has been accessed and its details have been used to determine whether the device is functioning properly. When technical diagnosis is needed, the supported follow-up action is to send the error details to the technical team. No setting changes are part of this procedure.