Resolve the 180T Reconnection Message After Startup
Upgrade the 180T system firmware first; if the Reconnection message remains, the mainboard may need replacement.
Learn MoreArticle Center
FAQ Articles
Explore FAQ Articles articles from Mietubl.
Restore Machine Settings With a Factory Reset
Back up your account information, restart the device, tap the blue icon 10 times during startup, and select Factory Reset.
Learn MoreMTB-CUT 180T Coverage for Phones, Tablets, and Laptops
The MTB-CUT 180T supports cuts up to 16 inches, with the MTB-CUT 180T Pro available for requirements up to 22 inches.
Learn MoreHow Gear Ratio Defines Cutting Distance and Scale
Gear Ratio controls how motor movement translates into actual cutting distance, directly affecting cutting accuracy and scaling.
Learn MoreOperate the DHP511 Independently from the MTB-CUT 180T
The DHP511 Photo Printer cannot connect directly to the MTB-CUT 180T and must be operated as an independent machine.
Learn MoreRestore Proper Screen Protector Cutting in Three Stages
Replace the blade and blade holder, retry with cutting pressure set to 300, and fine-tune the cutting module only if the cutting issue continues.
Learn MoreUV Material Cutting Parameters: Scale 6 and Pressure 380
For UV material, set the screen protector cutting machine’s blade holder scale to 6 and cutting pressure to 380; replace the blade if it cannot cut properly.
Learn MoreAccess Word Cutting for Names in Back Film Templates
Check that the app is version 3.0.03 or above, upgrade if necessary, and access Word Cutting from the upper-left corner of a back film template.
Learn MoreIndia Service Support Is Provided Through Distributors
Yes, distributors in India currently act as service centers, and customers should contact the distributor that sold the machine for support.
Learn MoreRestore Missing New Model Data on Your Cutting Machine
Update the machine software and manually synchronize its data to retrieve the latest available model information.
Learn MoreUnlock Word Cutting with App Version 3.0.03 or Later
Word Cutting is available in app version 3.0.03 and above and appears in the upper-left corner of any back film template.
Learn MoreCenter the M188 Cutting Range with a Custom Material Size
Set a custom material size on the M188 so its cutting range is accurately centered within the material.
Learn MoreDefault Cutting Settings and Material-Specific Ranges
Use a material size of 180 mm × 120 mm, cutting pressure of 300, cutting speed of 200, and blade holder scale of 5 as the default setup for most materials.
Learn MoreRestore Phone Models by Refreshing Cutting Software Data
Clear the app’s cache or storage data, re-download its software data files over stable Wi-Fi, and wait for the update to finish before operating the machine.
Learn MoreResolving an Unresponsive Touchscreen Through LCD Replacement
An unresponsive touchscreen may indicate an LCD screen failure, so contact the machine’s seller or local distributor to confirm compatibility and arrange LCD replacement.
Learn MoreFind a Solution or Send the Right Details to Technical Support
Search for an existing solution first, then report unresolved problems to the technical team through WhatsApp with relevant details and media.
Learn MoreFive Film Materials Available for the Screen Protector Machine
Yes, five raw material types are offered for the screen protector machine, covering clear, matte, anti-blue-ray, privacy, and combined anti-blue-ray and matte films.
Learn More