If you are having trouble configuring the machine, try a speed of 200, pressure of 300, blade holder scale of 5, material width of 180, and material height of 120. Enable Auto Loading and disable Cut Center. This default configuration is suitable for most screen protector materials and can satisfy most normal cutting requirements. If the problem remains after using these values, contact the technical support team through WhatsApp.
Recommended configuration values
The recommended defaults cover three parts of the machine configuration: cutting settings, material settings, and function settings. Use the following values together as the baseline configuration for most screen protector materials.
| Configuration area | Setting | Recommended value |
|---|---|---|
| Cutting | Speed | 200 |
| Cutting | Pressure | 300 |
| Cutting | Blade Holder Scale | 5 |
| Material | Width | 180 |
| Material | Height | 120 |
| Function | Auto Loading | Enabled |
| Function | Cut Center | Disabled |
How to apply the supported configuration
- Set the cutting values to speed 200, pressure 300, and blade holder scale 5.
- Set the material dimensions to a width of 180 and a height of 120.
- Enable Auto Loading and make sure Cut Center is disabled.
- Determine whether this configuration resolves the problem and satisfies the normal cutting requirement.
- If the configuration issue continues, contact the technical support team through WhatsApp.
Scope of these default settings
These settings are intended for most screen protector materials and most normal cutting requirements. They are recommended defaults, so their documented scope is broad rather than tied to a specific screen protector material or machine model. The configuration guidance does not state that the values will resolve every possible issue. Continued problems should therefore be directed to the technical support team through WhatsApp.
Common Questions
Which materials are covered by this configuration?
The recommended default settings are suitable for most screen protector materials. No separate values are provided for individual material types.
What if the default configuration does not solve the issue?
If you still cannot solve the configuration problem after using the recommended values and function settings, contact the technical support team through WhatsApp for additional help.
Was this article helpful?
Your feedback helps us improve future articles.