Access Name Printing with the Word Cutting Feature

To access the feature used for printing a name on skin, your app must be version 3.0.03 or later. Check the current version through About This Device. If it is earlier than version 3.0.03, open My, select App Upgrade, and update to the latest version. Word Cutting will then be available in the upper-left corner of any back film template.

Version requirement

Name printing through the Word Cutting feature is available only in app version 3.0.03 and above. Before looking for the feature in a back film template, confirm which version of the app is currently installed. The documented place for checking this information is About This Device.

If the displayed version is already 3.0.03 or higher, no app upgrade is required by this procedure. You can proceed to a back film template and look for Word Cutting. If the version is lower than 3.0.03, the feature will not be available until the app is upgraded.

How to make Word Cutting available

Follow these actions in order, using the version shown in the app to determine whether an upgrade is needed:

1. Check the installed app version. Go to About This Device and review the current app version.
2. Upgrade when the version is lower than 3.0.03. Go to My, select App Upgrade, and update the app to the latest version.
3. Open a back film template after upgrading. Once the app is on version 3.0.03 or later, open any back film template.
4. Locate Word Cutting. Find the Word Cutting feature in the upper-left corner of the back film template.

Completion check and documented limitation

The procedure is complete when the app is running version 3.0.03 or above and Word Cutting appears in the upper-left corner of a back film template. Its presence confirms that the required feature is available.

This procedure documents the version requirement, the app upgrade path, and the location of Word Cutting. It does not provide additional steps for entering, formatting, or printing the name after the feature has been located.