The Mietubl MTB-CUT 180T Series can connect to a supported printer for printing customized phone back films. Follow the operation video to connect and set up the printer, and make sure both the cutting machine and printer use the same Wi-Fi network. Currently supported models include the Canon G580/G680 Series and Epson L3250 Series.
What the Printer Connection Supports
The printer connection is available for Mietubl MTB-CUT 180T Series screen protector cutting machines. Its documented purpose is to print customized phone back films. This procedure applies specifically to connecting and setting up a printer for that function.
Printer compatibility is limited. Although specific Canon and Epson models are currently supported, not every printer model can connect to the MTB-CUT 180T Series.
Connection and Setup Procedure
Follow the operation video to connect and set up the printer. The documented setup instruction relies on this video for the connection process.
Make sure the printer and the MTB-CUT 180T are connected to the same Wi-Fi network. Both devices must use that network for the supported connection.
Use a currently supported printer model where possible. The documented supported models are the Canon G580/G680 Series and the Epson L3250 Series.
If your printer is not one of the listed models but uses drivers compatible with those models, try connecting it to check whether it works with the cutting machine.
Currently Supported Printer Models
The MTB-CUT 180T Series currently includes support for the following printer series:
- Canon G580/G680 Series
- Epson L3250 Series
These are the specifically identified supported options. The available evidence does not state that every Canon or Epson printer is compatible, so compatibility should not be assumed solely from the printer brand.
How to Check Compatibility
For a printer that uses a driver compatible with the listed Canon or Epson models, the documented compatibility check is to try connecting it. A successful test may show that the printer can work even though its model is not explicitly listed.
This possibility does not mean that all printers with similar drivers are supported. The final limitation is that not all printer models work with the MTB-CUT 180T Series; only the Canon G580/G680 Series and Epson L3250 Series are currently identified as supported, while other compatible-driver printers must be tested individually.
Was this article helpful?
Your feedback helps us improve future articles.