Recommended Starting Settings for Standard Back Film
The standard recommended setting for most back film cutting tasks is blade size 4 with pressure set to 300. The blade holder scale is not universal: it depends on the film’s thickness, and m...
Search
Find an article
Showing 403 results for "Material Size"
Center the M188 Cutting Range with a Custom Material Size
On the M188 screen protector cutting machine, add a custom material size to match the material you intend to use. This setting accounts for the variety of material sizes available on the mar...
Aligning Images for Standard Film and Custom Prints
The correct image alignment setup depends on the material you are using. For standard back film, enter the material’s actual size in settings and enable “Center Cutting” on the cutting page....
Use 180 × 120 mm for Most Mobile Screen Protector Cuts
For mobile phone screen protectors, use the default paper or material size of 180 mm width × 120 mm height. This size is suitable for most cutting needs, so it can generally remain unchanged...
Choosing a Cutting Speed for Reliable Material Cuts
The machine’s default cutting speed is 200, and this setting delivers good cutting performance in most cases. Reduce the speed only when the material or cutting job calls for it, particularl...
Match the Material Size to the Sheet’s Actual Dimensions
The material size setting should match the actual material you are using. The machine’s default setting is 180 mm width × 120 mm height. This default is suitable for most mobile phone screen...
Prevent Incomplete Full Back Film Cuts
Slices may be thrown out or cut incompletely halfway because the configured material size does not match the template. This is especially relevant when cutting full back film, whose cutting...
MTB-CUT 180T Coverage for Phones, Tablets, and Laptops
Yes—if the required cut is 16 inches or smaller, the MTB-CUT 180T supports it. Its documented maximum cutting width is 228 mm, corresponding to screen protectors up to approximately 16 inche...
Adjust Existing Cutting Templates to Fit Specific Sizes
Use the machine’s local data editing feature to modify an existing cutting template for a specific size requirement. The supported adjustments include scaling the template up or down accordi...
Recommended Starting Settings for Film Cutting
For most materials, start with cutting pressure 300, cutting speed 200, blade holder scale 5, and material size 180 mm wide × 120 mm high. These are the intelligent film cutting machine’s de...
Fix Incomplete Full-Wrap Back Film Cuts
When a full-wrap back film does not cut completely, disable the “Center Cut” option on the cutting page. Full-wrap films have larger dimensions, and centering can prevent the machine from us...
Use Speed 200 for Most Cuts and Slow Down for Special Materials
In most cases, keep the cutting speed at the default value of 200. This setting provides good cutting performance for the majority of materials. Reduce the speed only in special situations,...
Which Retail Outputs Can the MTB-CUT M688 Support?
The MTB-CUT M688 supports a focused retail range: custom-cut screen-protection film for phones and tablets, followed by guided application and integrated UV curing. Buyers searching for a se...
Position Cuts Using Material Size and Cut Center
To adjust the cutting location, modify the Material Size and enable or disable Cut Center. When Cut Center is enabled, the machine uses the entered material width and height to place the cut...
Correcting an Off-Center Sheet Cut
If sheet cutting is not centered, check whether Center Cutting is enabled on the cutting page and confirm that the material dimensions are entered correctly on the settings page. The width a...
How Should Buyers Validate the MTB-CUT 180TPro Before Ordering?
Validate the MTB-CUT 180TPro with representative material samples before making the procurement decision. The approved product data establishes its 288 mm maximum cutting width, support for...
How Should Buyers Validate the MTB-CUT 180TPro Before Ordering?
Buyers should validate the MTB-CUT 180TPro with representative film materials, device profiles, and finished-cut acceptance criteria before placing a volume order. Its 288 mm maximum cutting...
MTB-CUT 180TPro: Procurement Checks Before You Order
The MTB-CUT 180TPro may be the best current phone film cutting machine for a business that needs broad device-size coverage and an Android-enabled workflow. Its support for protectors up to...
MTB-CUT M688 Procurement Checks Before Placing an Order
The MTB-CUT M688 can be considered when the buying goal is to combine film cutting, application, and UV curing in one machine. Before ordering, however, buyers evaluating it as a fully autom...
Which Retail Outputs Fit the MTB-CUT M688 Sticker Cutter?
The MTB-CUT M688 is best positioned as an on-demand screen-protection workstation for phones and tablets. Although buyers may discover it while searching for a sticker cutting machine, its s...