Search
Showing 75 results for "blade pressure"
Blade pressure should be set according to the screen protector material. Regular back film generally requires 250–300, four-layer soft film 300–350, UV material 350–400, and explosion-proof...
Film can bend or bulge during cutting when the blade holder is set too deep, the blade is worn out, or a non-original blade does not match the required angle and sharpness. Reduce the blade...
The standard recommended setting for most back film cutting tasks is blade size 4 with pressure set to 300. The blade holder scale is not universal: it depends on the film’s thickness, and m...
For most cutting tasks, keep the machine’s default cutting speed at 200 and blade pressure at 300. These settings are suitable for the majority of screen protector materials, so they normall...
The cutting parameter setting for UV material is the documented combination of blade holder scale 6 and cutting pressure 380 on the screen protector cutting machine. These two values define...
The basic default setup is a material size of 180 mm width × 120 mm height, cutting pressure of 300, cutting speed of 200, and blade holder scale of 5. These defaults are suitable for most m...
For most materials, start with cutting pressure 300, cutting speed 200, blade holder scale 5, and material size 180 mm wide × 120 mm high. These are the intelligent film cutting machine’s de...
If the machine cannot cut screen protector materials properly, first replace both the blade and blade holder with new ones. Then set the cutting pressure to 300 and attempt the cut again. Fi...
The screen protector cutting machine can store pressure settings in five built-in preset slots. In Settings, rename each preset for a commonly used cutting material and save the correspondin...
When the car moves after cutting starts but the blade holder does not drop, first verify the power adapter, cutting pressure, and cable connections. Use the original power adapter, increase...
If the blade does not drop properly during cutting, the most likely cause is a malfunctioning mainboard. The blade-down action depends on the Y-axis motor signal sent by the mainboard. When...
No. This screen protector cutting machine is not a laser cutting machine. It uses physical cutting with a blade. The documented benefits of this cutting method are safe operation, no cutting...
Yes, the screen protector machine can cut PET material with a thickness of 0.45 mm. However, successful use may require adjustments to the machine settings. The cutter scale can be adjusted...
Buyers should validate the MTB-CUT 180T with representative film materials and real device patterns before approving an order. Its stated material support and adjustable cutting controls mak...
If the main holder, also called the blade carriage holder, is loose and must be pressed by hand for the machine to cut properly, the holder is worn out or has lost stability. This precision...
The MTB-CUT 180TPro is operated through its 7-inch color touchscreen or a connected Android app: the operator finds the required device model, prepares and loads the appropriate film, sends...
If you are having trouble configuring the machine, try a speed of 200, pressure of 300, blade holder scale of 5, material width of 180, and material height of 120. Enable Auto Loading and di...
Yes, the MTB-CUT 180T can be considered for a mixed screen-protector program, but approval should depend on sample validation rather than the material list alone. It supports TPU, PET, clear...
If shapes are not cutting properly, first check the cutting carriage and pressure rollers. The carriage should be firmly secured on the rail. The gaps between the pressure rollers should be...
For mobile phone screen protectors, use the default paper or material size of 180 mm width × 120 mm height. This size is suitable for most cutting needs, so it can generally remain unchanged...
