Connect a Non-Wi-Fi HP Printer Through PrinterServer
To connect an HP printer without Wi-Fi to the screen protector cutting machine, install PrinterServer on a computer. The computer running PrinterServer, the HP printer, and the cutting machi...
Search
Find an article
Showing 504 results for "film machine"
MTB-CUT M888 Direct Sourcing: Buyer Verification Criteria
Before ordering the MTB-CUT M888 through a direct-sourcing channel, buyers should first verify that its integrated printing-and-cutting workflow matches the intended product range. The machi...
Position Cuts Using Material Size and Cut Center
To adjust the cutting location, modify the Material Size and enable or disable Cut Center. When Cut Center is enabled, the machine uses the entered material width and height to place the cut...
Restore Proper Screen Protector Cutting in Three Stages
If the machine cannot cut screen protector materials properly, first replace both the blade and blade holder with new ones. Then set the cutting pressure to 300 and attempt the cut again. Fi...
Adjust Existing Cutting Templates to Fit Specific Sizes
Use the machine’s local data editing feature to modify an existing cutting template for a specific size requirement. The supported adjustments include scaling the template up or down accordi...
Restore Blade-Holder Movement When the Car Still Travels
When the car moves after cutting starts but the blade holder does not drop, first verify the power adapter, cutting pressure, and cable connections. Use the original power adapter, increase...
Resolve a Hardware Version Query Failure
If the device displays “Failed to query the hardware version,” restart the machine and check whether the message disappears. If restarting does not resolve the issue, the mainboard may be fa...
Resolve Error 1002 or Identify a Possible Mainboard Fault
Error 1002 indicates a serial communication error within the machine. First, reconnect the machine to Wi-Fi and restart it. If the error remains, restart the device again and, while it is st...
Diagnose a Nonresponsive Sensor Using Auto-Loading and Roller Checks
If the machine sensor is not working, first check whether Auto-loading is disabled in Settings and enable it if necessary. Then try cutting any model while observing the roller. Normal rolle...
Replace the Auto-Loading Sensor and Preserve Automatic Loading
To replace the auto-loading sensor, follow the documented step-by-step replacement video supplied for this procedure. The sensor enables the machine to load cutting materials automatically a...
Access Word Cutting After Updating the App
To use Word Cutting, confirm that the app is running version 3.0.03 or above. Check the installed version in “About This Device.” If it is lower than 3.0.03, open “My,” select “App Upgrade,”...
Correct Screen Protector Application With Leaner Model Inventory
For distributors and retailers, the strongest inventory decision is usually a hybrid one: hold model-specific finished privacy glass where demand is predictable, and use on-demand production...
Choosing Blade Pressure for Different Screen Protector Materials
Blade pressure should be set according to the screen protector material. Regular back film generally requires 250–300, four-layer soft film 300–350, UV material 350–400, and explosion-proof...
Tempered Glass or Hydrogel for an In-Store Service Workflow?
For an in-store service centered on drop protection, choose tempered glass when the supplier can provide relevant impact evidence. The approved data includes tested impact and edge-strength...
Replace an M288 Fixture That Cannot Hold a Phone Properly
The MTB-CUT M288 intelligent film cutting and pasting machine uses a modular fixture design. If its fixture is unable to properly hold a phone, replace the fixture by following the method de...
Can the MTB-CUT M888 Pass Your Material Sample Test?
Yes, the MTB-CUT M888 may be suitable as a fully automatic integrated cutting machine, but approval should depend on representative sample testing rather than specifications alone. Its integ...
MTB-CUT M888: Procurement Checks Before Placing an Order
The MTB-CUT M888 is worth considering when a buyer needs one compact machine for both printing and cutting products such as phone back films, protective films, labels, photos, and greeting c...
MTB-CUT M688 Smart Cut-and-Apply Machine: Buyer Checklist
The MTB-CUT M688 should be considered when a buyer wants cutting, guided application, and UV curing in one smart cut-and-apply machine. Before ordering, confirm that its supported protector...
MTB-CUT M888: Shift From Model Stock to On-Demand Output
For buyers deciding between model-specific finished stock and on-demand production, the MTB-CUT M888 is best considered as a flexible supplement to inventory rather than an automatic replace...
MTB-CUT M888 for Leaner On-Demand Accessory Inventory
For buyers deciding between on-demand production and model-specific finished stock, the MTB-CUT M888 is best positioned as an inventory-flexibility tool. Its integrated printing and cutting...