Restore Connectivity by Testing the Wi-Fi Network List
Open the machine’s Wi-Fi list and confirm that Wi-Fi is enabled and nearby networks appear. If the list loads normally, forget your network and reconnect with the correct password. If the ma...
Search
Find an article
Showing 451 results for "custom device fit"
Match the Material Size to the Sheet’s Actual Dimensions
The material size setting should match the actual material you are using. The machine’s default setting is 180 mm width × 120 mm height. This default is suitable for most mobile phone screen...
Diagnose a Nonresponsive Sensor Using Auto-Loading and Roller Checks
If the machine sensor is not working, first check whether Auto-loading is disabled in Settings and enable it if necessary. Then try cutting any model while observing the roller. Normal rolle...
Resolve an Unresponsive Touch Screen by Checking Power and LCD
If the touch screen responds slowly or does not respond at all, first confirm that the machine is using its original 24V / 2.7A power adapter. A non-original or incorrect adapter may cause e...
When Repeated Login Prompts Coincide With Missing WiFi Networks
Open the machine’s WiFi list and check whether it can detect and display available WiFi networks normally. If no networks appear, the machine’s network/WiFi module may be faulty. Because thi...
Restore Sensor Operation by Checking Auto-Loading and the Roller
If the machine’s sensor is not working, first open Settings and check whether “Auto-loading” is disabled. Enable it if necessary. Then try cutting any model and observe the roller. Normal ro...
Prevent Incomplete Full Back Film Cuts
Slices may be thrown out or cut incompletely halfway because the configured material size does not match the template. This is especially relevant when cutting full back film, whose cutting...
Store Reusable Pressure Presets for Faster Material Changes
The screen protector cutting machine can store pressure settings in five built-in preset slots. In Settings, rename each preset for a commonly used cutting material and save the correspondin...
Restore a Missing Mobile Model List in the Cutter APP
If the mobile model list is not displayed at all, clear the Cutter APP cache completely. After the system is restored, open “My” → “Data Update” to refresh all templates and system data. Thi...
Recover Incomplete APP Data After K_data_update_error
If the machine displays “K_data_update_error,” open Mine → Data Update and download the data again. This error usually appears when APP data loading was interrupted after an upgrade, le...
Restore Full Lamination Cutting by Disabling Cut Center
If the machine cuts only the camera area instead of the full lamination, disable the Cut Center option on the cutting page and try cutting again. This remedy applies especially when cutting...