Recommended Starting Settings for Standard Back Film
The standard recommended setting for most back film cutting tasks is blade size 4 with pressure set to 300. The blade holder scale is not universal: it depends on the film’s thickness, and m...
Search
Find an article
Showing 422 results for "material size setting"
Match the Material Size to the Sheet’s Actual Dimensions
The material size setting should match the actual material you are using. The machine’s default setting is 180 mm width × 120 mm height. This default is suitable for most mobile phone screen...
Use Speed 200 for Most Cuts and Slow Down for Special Materials
In most cases, keep the cutting speed at the default value of 200. This setting provides good cutting performance for the majority of materials. Reduce the speed only in special situations,...
Restore Normal Cutting Speed by Correcting the Speed Setting
If the machine is operating slowly, the cutting speed is usually set too low. Open the Settings page, find the Speed option, set it to the default value of 200, save the setting, and try cut...
Store Reusable Pressure Presets for Faster Material Changes
The screen protector cutting machine can store pressure settings in five built-in preset slots. In Settings, rename each preset for a commonly used cutting material and save the correspondin...
UV Material Cutting Parameters: Scale 6 and Pressure 380
The cutting parameter setting for UV material is the documented combination of blade holder scale 6 and cutting pressure 380 on the screen protector cutting machine. These two values define...
Choosing a Cutting Speed for Reliable Material Cuts
The machine’s default cutting speed is 200, and this setting delivers good cutting performance in most cases. Reduce the speed only when the material or cutting job calls for it, particularl...
How Gear Ratio Defines Cutting Distance and Scale
The Gear Ratio setting defines the relationship between motor movement and the actual distance cut by the equipment. Because this relationship determines how movement is translated into cutt...
0.45 mm PET Cutting Is Supported With Setting Adjustments
Yes, the screen protector machine can cut PET material with a thickness of 0.45 mm. However, successful use may require adjustments to the machine settings. The cutter scale can be adjusted...
Use 180 × 120 mm for Most Mobile Screen Protector Cuts
For mobile phone screen protectors, use the default paper or material size of 180 mm width × 120 mm height. This size is suitable for most cutting needs, so it can generally remain unchanged...
Recommended Starting Settings for Film Cutting
For most materials, start with cutting pressure 300, cutting speed 200, blade holder scale 5, and material size 180 mm wide × 120 mm high. These are the intelligent film cutting machine’s de...
Choosing Blade Pressure for Different Screen Protector Materials
Blade pressure should be set according to the screen protector material. Regular back film generally requires 250–300, four-layer soft film 300–350, UV material 350–400, and explosion-proof...
Cutting Different Material Thicknesses Requires Scale Adjustment
Conditionally, yes: the screen protector cutting machine can cut materials of various thicknesses when the cutter scale is adjusted accordingly. The documented support does not specify a max...
Replace the Auto-Loading Sensor and Preserve Automatic Loading
To replace the auto-loading sensor, follow the documented step-by-step replacement video supplied for this procedure. The sensor enables the machine to load cutting materials automatically a...
Restore Sensor Operation by Checking Auto-Loading and the Roller
If the machine’s sensor is not working, first open Settings and check whether “Auto-loading” is disabled. Enable it if necessary. Then try cutting any model and observe the roller. Normal ro...
Make Cutter App Launch Automatically at Startup
If Cutter App does not launch automatically when the screen protector cutting machine starts, set Cutter App as the device’s Home App. Open System Settings, locate Cutter App under App Manag...
Center the M188 Cutting Range with a Custom Material Size
On the M188 screen protector cutting machine, add a custom material size to match the material you intend to use. This setting accounts for the variety of material sizes available on the mar...
How Do You Use the MTB-CUT 180T for Different Film Types?
The MTB-CUT 180T is used by selecting a device template, loading a supported film material, setting the cutting parameters, and starting the cut from its touchscreen. Its supported outputs i...
Stop Film Bulging by Correcting the Blade Setup
Film can bend or bulge during cutting when the blade holder is set too deep, the blade is worn out, or a non-original blade does not match the required angle and sharpness. Reduce the blade...
Restore Missing Models on a Screen Protector Cutting Machine
If the screen protector cutting machine is not showing phone models, the issue is usually related to software or settings rather than hardware. Incorrect language settings or problems with t...