Search
Showing 33 results for "startup fault"
A startup “Timeout” error combined with an unresponsive “Reconnect” control usually means the screen cannot connect properly to the mainboard. The documented causes are lost screen firmware,...
If the 180T screen protector cutting machine displays a “Reconnect” or “Reconnection” message after startup, the documented likely cause is an issue with the system firmware. Upgrade the fir...
If the machine has stopped working properly, technical support needs to know the exact fault condition before it can provide the correct solution. Record a clear video showing the problem, c...
If the MTB-CUT M288 intelligent film cutting and pasting machine displays a “Reconnection” message at startup or its cutting car fails to cut properly, the mainboard may be faulty. For eithe...
If Cutter App does not launch automatically when the screen protector cutting machine starts, set Cutter App as the device’s Home App. Open System Settings, locate Cutter App under App Manag...
Error 1002 indicates a serial communication error within the machine. First, reconnect the machine to Wi-Fi and restart it. If the error remains, restart the device again and, while it is st...
If a screen protector cutting machine cannot load phone models and displays a blank cutting page, clear the app’s cache or storage data and re-download the software data files. Keep the mach...
If the device displays “Unable to communicate with the device (13904),” open “My,” select “About,” and check whether the QR code is displayed. A QR code that does not appear correctly may in...
If the touchscreen does not respond, the documented possible cause is an LCD screen failure. Contact your local distributor or the person who sold you the machine for assistance. Before repl...
When the car moves after cutting starts but the blade holder does not drop, first verify the power adapter, cutting pressure, and cable connections. Use the original power adapter, increase...
If the device displays “Failed to query the hardware version,” restart the machine and check whether the message disappears. If restarting does not resolve the issue, the mainboard may be fa...
If the machine sensor is not working, first check whether Auto-loading is disabled in Settings and enable it if necessary. Then try cutting any model while observing the roller. Normal rolle...
Open the machine’s WiFi list and check whether it can detect and display available WiFi networks normally. If no networks appear, the machine’s network/WiFi module may be faulty. Because thi...
If the machine is operating slowly, the cutting speed is usually set too low. Open the Settings page, find the Speed option, set it to the default value of 200, save the setting, and try cut...
The MTB-CUT 180T is a suitable mobile screen protector cutting machine when its 228 mm cutting width, supported film materials, and cloud-based model workflow match the buyer’s service scope...
Counter space, power access, media storage, and staff handoffs determine whether a smart all-in-one cutting machine will work at the service counter. The MTB-CUT M888 is a strong candidate f...
Counter depth, power access, media clearance, and staff handoffs should determine whether the MTB-CUT M888 is ready for a store rollout. Its compact body and integrated printing-and-cutting...
The MTB-CUT 180TPro is operated through its 7-inch color touchscreen or a connected Android app: the operator finds the required device model, prepares and loads the appropriate film, sends...
The MTB-CUT M888 is a practical procurement candidate when the buying goal is to combine small-format printing and contour cutting in one compact machine. Its approved capabilities include i...
Buy the MTB-CUT 180TPro only after the supplier demonstrates a complete first-use cycle with your target film and device models. Product information lists a 7-inch color touchscreen, Android...
