Resolve the 180T Reconnection Message After Startup
If the 180T screen protector cutting machine displays a “Reconnect” or “Reconnection” message after startup, the documented likely cause is an issue with the system firmware. Upgrade the fir...
Search
Find an article
Showing 58 results for "Startup troubleshooting"
Resolving a Startup Timeout and Unresponsive Reconnect Control
A startup “Timeout” error combined with an unresponsive “Reconnect” control usually means the screen cannot connect properly to the mainboard. The documented causes are lost screen firmware,...
M288 Mainboard Replacement for Startup and Cutting Faults
If the MTB-CUT M288 intelligent film cutting and pasting machine displays a “Reconnection” message at startup or its cutting car fails to cut properly, the mainboard may be faulty. For eithe...
Make Cutter App Launch Automatically at Startup
If Cutter App does not launch automatically when the screen protector cutting machine starts, set Cutter App as the device’s Home App. Open System Settings, locate Cutter App under App Manag...
Resolve Error 1002 or Identify a Possible Mainboard Fault
Error 1002 indicates a serial communication error within the machine. First, reconnect the machine to Wi-Fi and restart it. If the error remains, restart the device again and, while it is st...
Restore Phone Models by Refreshing Cutting Software Data
If a screen protector cutting machine cannot load phone models and displays a blank cutting page, clear the app’s cache or storage data and re-download the software data files. Keep the mach...
Resolve a Film-Cutting “Time Out” by Checking Mainboard Status
When a “Time Out” message appears during film cutting, open My → About this machine and check whether a QR code is displayed. No QR code indicates a mainboard malfunction, and the documented...
Mobile Screen Protector Cutting Machine: 5 Order Checks
The MTB-CUT 180T is a suitable mobile screen protector cutting machine when its 228 mm cutting width, supported film materials, and cloud-based model workflow match the buyer’s service scope...
How to Operate the MTB-CUT 180TPro Before You Order
The MTB-CUT 180TPro is operated through its 7-inch color touchscreen or a connected Android app: the operator finds the required device model, prepares and loads the appropriate film, sends...
MTB-CUT 180TPro Usage Guide: Pre-Order Checks for Buyers
Buy the MTB-CUT 180TPro only after the supplier demonstrates a complete first-use cycle with your target film and device models. Product information lists a 7-inch color touchscreen, Android...
Resolve an Insufficient Balance Message With a QR Code Photo
If the machine shows an “Insufficient balance” message, contact the support team through WhatsApp and send a clear photo of the machine’s QR code. The team will use the QR code information t...
Resolve a Hardware Version Query Failure
If the device displays “Failed to query the hardware version,” restart the machine and check whether the message disappears. If restarting does not resolve the issue, the mainboard may be fa...
Restore Sensor Operation by Checking Auto-Loading and the Roller
If the machine’s sensor is not working, first open Settings and check whether “Auto-loading” is disabled. Enable it if necessary. Then try cutting any model and observe the roller. Normal ro...
Restore a Missing Mobile Model List in the Cutter APP
If the mobile model list is not displayed at all, clear the Cutter APP cache completely. After the system is restored, open “My” → “Data Update” to refresh all templates and system data. Thi...
Smart All-in-One Cutting Machine: M888 Store Readiness
Counter space, power access, media storage, and staff handoffs determine whether a smart all-in-one cutting machine will work at the service counter. The MTB-CUT M888 is a strong candidate f...
Store Readiness for the MTB-CUT M888 Print-and-Cut Machine
Counter depth, power access, media clearance, and staff handoffs should determine whether the MTB-CUT M888 is ready for a store rollout. Its compact body and integrated printing-and-cutting...
MTB-CUT M888 Automatic Print-and-Cut Machine: Buyer Checks
The MTB-CUT M888 is a practical procurement candidate when the buying goal is to combine small-format printing and contour cutting in one compact machine. Its approved capabilities include i...
Restore Machine Settings With a Factory Reset
To restore the machine settings, first back up your account information. Restart the device and, as the machine starts up, quickly tap the blue icon 10 times. Then select “Factory Reset.” Th...
Error 13904: Check the QR Code Before Replacing the Mainboard
If the device displays “Unable to communicate with the device (13904),” open “My,” select “About,” and check whether the QR code is displayed. A QR code that does not appear correctly may in...
Restore Model Template Downloads on the 180T Machine
If the 180T machine cannot download model data templates, the usual cause is an unstable network connection rather than a hardware problem. Check the current connection, reconnect to Wi-Fi,...