Custom Screen Protectors: Choose Privacy or Blue-Light?
When a customer asks for either privacy protection or blue-light filtering, fulfill the request according to the intended use rather than treating the two labels as interchangeable. Choose a...
Search
Find an article
Showing 514 results for "Print and Cut"
Correcting an Off-Center Sheet Cut
If sheet cutting is not centered, check whether Center Cutting is enabled on the cutting page and confirm that the material dimensions are entered correctly on the settings page. The width a...
Connect an MTB-CUT 180T to a Compatible Printer
The Mietubl MTB-CUT 180T Series can connect to a supported printer for printing customized phone back films. Follow the operation video to connect and set up the printer, and make sure both...
Five Film Materials Available for the Screen Protector Machine
Yes. Five types of raw materials are offered for the screen protector machine: HD clear films, matte screen protectors, anti-blue-ray films, privacy films, and combined anti-blue-ray and mat...
Restore Connectivity by Testing the Wi-Fi Network List
Open the machine’s Wi-Fi list and confirm that Wi-Fi is enabled and nearby networks appear. If the list loads normally, forget your network and reconnect with the correct password. If the ma...
Operate the DHP511 Independently from the MTB-CUT 180T
The DHP511 Photo Printer cannot be connected directly to the Mietubl MTB-CUT 180T Screen Protector Cutting Machine. These are two independent machines and cannot connect to each other. To us...
Restore Proper Screen Protector Cutting in Three Stages
If the machine cannot cut screen protector materials properly, first replace both the blade and blade holder with new ones. Then set the cutting pressure to 300 and attempt the cut again. Fi...
Restore Phone Models by Refreshing Cutting Software Data
If a screen protector cutting machine cannot load phone models and displays a blank cutting page, clear the app’s cache or storage data and re-download the software data files. Keep the mach...
Stop Film Bulging by Correcting the Blade Setup
Film can bend or bulge during cutting when the blade holder is set too deep, the blade is worn out, or a non-original blade does not match the required angle and sharpness. Reduce the blade...
Unlock Word Cutting with App Version 3.0.03 or Later
Graphic cutting and custom text cutting depend on the installed app version. The documented Word Cutting feature is available only in version 3.0.03 and above. Check your current version in...
Restore Missing New Model Data on Your Cutting Machine
If your cutting machine is not showing new models, update it to the latest available version and then select “My” → “Data Update” to synchronize the newest available model data. Some newly r...
Restore an Unresponsive Cutter App with a Factory Reset
If the Cutter App is not responding, restore it to its original working state with a factory reset. This can resolve most software-related issues. Because a factory reset may roll the APP ba...
Use 180 × 120 mm for Most Mobile Screen Protector Cuts
For mobile phone screen protectors, use the default paper or material size of 180 mm width × 120 mm height. This size is suitable for most cutting needs, so it can generally remain unchanged...
Resolve a Film-Cutting “Time Out” by Checking Mainboard Status
When a “Time Out” message appears during film cutting, open My → About this machine and check whether a QR code is displayed. No QR code indicates a mainboard malfunction, and the documented...
Restore Precise Shapes by Checking the Carriage and Rollers
If shapes are not cutting properly, first check the cutting carriage and pressure rollers. The carriage should be firmly secured on the rail. The gaps between the pressure rollers should be...
Restore Material Detection and Auto Loading on a Cutting Machine
When the cutting machine’s sensor malfunctions, the machine may not detect or automatically load the cutting material. If the sensor is completely non-functional, contact your distributor or...
Restore Blade-Holder Movement When the Car Still Travels
When the car moves after cutting starts but the blade holder does not drop, first verify the power adapter, cutting pressure, and cable connections. Use the original power adapter, increase...
Recommended Starting Settings for Film Cutting
For most materials, start with cutting pressure 300, cutting speed 200, blade holder scale 5, and material size 180 mm wide × 120 mm high. These are the intelligent film cutting machine’s de...
Download and Set Up PrinterServer on Windows
Download PrinterServer directly from https://www.mietubl.com/app/printerserver.rar. Install the software on a Windows computer. For the supported setup, the Windows computer, printer, and cu...
Fix Incomplete Full-Wrap Back Film Cuts
When a full-wrap back film does not cut completely, disable the “Center Cut” option on the cutting page. Full-wrap films have larger dimensions, and centering can prevent the machine from us...