Restore Missing Phone Models in the Cutter App
If the machine is not showing phone models, clear the Cutter App’s storage or cache, restart the app, and allow it to download the required data files again. After reopening the app, wait un...
Search
Find an article
Showing 495 results for "retail cutting service"
Restore Model Template Downloads on the 180T Machine
If the 180T machine cannot download model data templates, the usual cause is an unstable network connection rather than a hardware problem. Check the current connection, reconnect to Wi-Fi,...
Custom Drop-Protection Films: Tempered Glass or Hydrogel?
When a customer requests a personalized screen protector with stronger drop protection, specify tested tempered glass rather than assuming hydrogel will perform better. The approved glass op...
Replace a Loose Blade Carriage Holder Instead of Tightening It
If the main holder, also called the blade carriage holder, is loose and must be pressed by hand for the machine to cut properly, the holder is worn out or has lost stability. This precision...
Mobile Film Cutter Tutorial: Procurement Checks Before Ordering
The MTB-CUT 180TPro may suit buyers who need to cut screen protectors for phones and larger devices, but the buying decision should depend on a verified operating trial—not specifications al...
Find a Solution or Send the Right Details to Technical Support
To report a problem, first search the current window using keywords related to your issue. If you find a relevant solution, use that information to address the problem. If no relevant inform...
Default Cutting Settings and Material-Specific Ranges
The basic default setup is a material size of 180 mm width × 120 mm height, cutting pressure of 300, cutting speed of 200, and blade holder scale of 5. These defaults are suitable for most m...
Which Mobile Film Cutter Brand Is Safer to Approve?
A good mobile film cutter brand is the one that passes tests with your actual materials, device mix, and acceptance standards. For buyers handling larger screens, Mietubl’s MTB-CUT 180TPro i...
M288 Mainboard Replacement for Startup and Cutting Faults
If the MTB-CUT M288 intelligent film cutting and pasting machine displays a “Reconnection” message at startup or its cutting car fails to cut properly, the mainboard may be faulty. For eithe...
How Should Buyers Validate the MTB-CUT 180TPro Before Ordering?
Validate the MTB-CUT 180TPro with representative material samples before making the procurement decision. The approved product data establishes its 288 mm maximum cutting width, support for...
Restore Cutting Accuracy by Securing the Guide-Rail Car
Crooked or distorted cutting can occur when the car is loose on the guide rail. Correct the issue by adjusting the clearance between the car and the rail, then secure the car while pressing...
M188 Auto-Loading Sensor Replacement for Loading Problems
If the MTB-CUT M188 screen protector cutting machine is unable to load cutting material properly, the auto-loading sensor may be malfunctioning. Use the documented step-by-step video guide t...
Restore Data Loading When the Machine Is Online
If the machine is connected to the internet but does not load data, cross-border network latency may be responsible. The machine combines offline and cloud-based data processing so that it c...
Why the HDMI-Type Opening Has No Function on the Current Machine
The HDMI-type opening next to the power button is a reserved opening in the machine’s mold. It does not serve a functional purpose and is not active on the current version of the machine. Ma...
Check Rear Shipping Screws When the Carriage Will Not Move
If the machine’s carriage is not moving and the machine is making noise, the rear fixing screws may still be installed. These screws secure the carriage during shipping and are usually the c...
Restore Connectivity by Testing the Wi-Fi Network List
Open the machine’s Wi-Fi list and confirm that Wi-Fi is enabled and nearby networks appear. If the list loads normally, forget your network and reconnect with the correct password. If the ma...
Resolve an Unresponsive Touch Screen by Checking Power and LCD
If the touch screen responds slowly or does not respond at all, first confirm that the machine is using its original 24V / 2.7A power adapter. A non-original or incorrect adapter may cause e...
When Repeated Login Prompts Coincide With Missing WiFi Networks
Open the machine’s WiFi list and check whether it can detect and display available WiFi networks normally. If no networks appear, the machine’s network/WiFi module may be faulty. Because thi...
Restore a Missing Mobile Model List in the Cutter APP
If the mobile model list is not displayed at all, clear the Cutter APP cache completely. After the system is restored, open “My” → “Data Update” to refresh all templates and system data. Thi...
Recover Incomplete APP Data After K_data_update_error
If the machine displays “K_data_update_error,” open Mine → Data Update and download the data again. This error usually appears when APP data loading was interrupted after an upgrade, le...