Search
Showing 403 results for "Material Size"
The material size setting should match the actual material you are using. The machine’s default setting is 180 mm width × 120 mm height. This default is suitable for most mobile phone screen...
For mobile phone screen protectors, use the default paper or material size of 180 mm width × 120 mm height. This size is suitable for most cutting needs, so it can generally remain unchanged...
On the M188 screen protector cutting machine, add a custom material size to match the material you intend to use. This setting accounts for the variety of material sizes available on the mar...
The correct image alignment setup depends on the material you are using. For standard back film, enter the material’s actual size in settings and enable “Center Cutting” on the cutting page....
For most materials, start with cutting pressure 300, cutting speed 200, blade holder scale 5, and material size 180 mm wide × 120 mm high. These are the intelligent film cutting machine’s de...
The standard recommended setting for most back film cutting tasks is blade size 4 with pressure set to 300. The blade holder scale is not universal: it depends on the film’s thickness, and m...
The basic default setup is a material size of 180 mm width × 120 mm height, cutting pressure of 300, cutting speed of 200, and blade holder scale of 5. These defaults are suitable for most m...
Slices may be thrown out or cut incompletely halfway because the configured material size does not match the template. This is especially relevant when cutting full back film, whose cutting...
When a full-wrap back film does not cut completely, disable the “Center Cut” option on the cutting page. Full-wrap films have larger dimensions, and centering can prevent the machine from us...
Blade pressure should be set according to the screen protector material. Regular back film generally requires 250–300, four-layer soft film 300–350, UV material 350–400, and explosion-proof...
To adjust the cutting location, modify the Material Size and enable or disable Cut Center. When Cut Center is enabled, the machine uses the entered material width and height to place the cut...
Buyers should approve film only after confirming that it is cuttable screen-protector material supplied in a format compatible with the MTB-CUT M688 cutting, application, and UV-curing workf...
The machine’s default cutting speed is 200, and this setting delivers good cutting performance in most cases. Reduce the speed only when the material or cutting job calls for it, particularl...
The screen protector cutting machine can store pressure settings in five built-in preset slots. In Settings, rename each preset for a commonly used cutting material and save the correspondin...
If sheet cutting is not centered, check whether Center Cutting is enabled on the cutting page and confirm that the material dimensions are entered correctly on the settings page. The width a...
The cutting parameter setting for UV material is the documented combination of blade holder scale 6 and cutting pressure 380 on the screen protector cutting machine. These two values define...
The MTB-CUT 180T may fit a distributor or reseller portfolio when customers need films for varied devices, stores want to reduce dependence on model-specific precut stock, and operators can...
Buyers should not order film for the MTB-CUT M688 by relying on a generic label such as “universal screen protector film.” The approved product data does not identify specific film chemistri...
The MTB-CUT M688 needs cuttable screen-protector material that fits its material and cutting limits and is suitable for the intended application and UV-finishing process. The approved produc...
Yes, the MTB-CUT 180T can be considered for a mixed screen-protector program, but approval should depend on sample validation rather than the material list alone. It supports TPU, PET, clear...
