Restore Blade-Down Operation by Replacing the Mainboard
If the blade does not drop properly during cutting, the most likely cause is a malfunctioning mainboard. The blade-down action depends on the Y-axis motor signal sent by the mainboard. When...
Search
Find an article
Showing 113 results for "Mainboard connection"
Error 13904: Check the QR Code Before Replacing the Mainboard
If the device displays “Unable to communicate with the device (13904),” open “My,” select “About,” and check whether the QR code is displayed. A QR code that does not appear correctly may in...
Resolving a Startup Timeout and Unresponsive Reconnect Control
A startup “Timeout” error combined with an unresponsive “Reconnect” control usually means the screen cannot connect properly to the mainboard. The documented causes are lost screen firmware,...
Resolve the 180T Reconnection Message After Startup
If the 180T screen protector cutting machine displays a “Reconnect” or “Reconnection” message after startup, the documented likely cause is an issue with the system firmware. Upgrade the fir...
Resolve a Hardware Version Query Failure
If the device displays “Failed to query the hardware version,” restart the machine and check whether the message disappears. If restarting does not resolve the issue, the mainboard may be fa...
M288 Mainboard Replacement for Startup and Cutting Faults
If the MTB-CUT M288 intelligent film cutting and pasting machine displays a “Reconnection” message at startup or its cutting car fails to cut properly, the mainboard may be faulty. For eithe...
Resolve a Film-Cutting “Time Out” by Checking Mainboard Status
When a “Time Out” message appears during film cutting, open My → About this machine and check whether a QR code is displayed. No QR code indicates a mainboard malfunction, and the documented...
Restore Blade-Holder Movement When the Car Still Travels
When the car moves after cutting starts but the blade holder does not drop, first verify the power adapter, cutting pressure, and cable connections. Use the original power adapter, increase...
Resolve Error 1002 by Checking the Device QR Code
Error 1002 means that a device port is occupied. Restart the device, then open My and select About This Device to check whether the QR code appears. If the QR code is missing, the device lik...
Resolve Error 1002 or Identify a Possible Mainboard Fault
Error 1002 indicates a serial communication error within the machine. First, reconnect the machine to Wi-Fi and restart it. If the error remains, restart the device again and, while it is st...
Restore Connectivity by Testing the Wi-Fi Network List
Open the machine’s Wi-Fi list and confirm that Wi-Fi is enabled and nearby networks appear. If the list loads normally, forget your network and reconnect with the correct password. If the ma...
Connect a Non-Wi-Fi HP Printer Through PrinterServer
To connect an HP printer without Wi-Fi to the screen protector cutting machine, install PrinterServer on a computer. The computer running PrinterServer, the HP printer, and the cutting machi...
Restore M180T Template Downloads With a Stable Connection
If the M180T has trouble downloading model data or templates, connect the machine to another stable Wi-Fi network or use a mobile hotspot to provide internet access. The download depends on...
Restore Model Template Downloads on the 180T Machine
If the 180T machine cannot download model data templates, the usual cause is an unstable network connection rather than a hardware problem. Check the current connection, reconnect to Wi-Fi,...
Operate the DHP511 Independently from the MTB-CUT 180T
The DHP511 Photo Printer cannot be connected directly to the Mietubl MTB-CUT 180T Screen Protector Cutting Machine. These are two independent machines and cannot connect to each other. To us...
Connect a Printer Based on Your Cutting Machine Barcode
Start by checking the barcode on the back of your screen protector cutting machine. A barcode beginning with MT00 supports connection to Canon G580, Canon G680, and Epson L3250 printers when...
Connect a Non-Canon or Non-Epson Printer Through a PC
To connect a printer brand other than Canon or Epson to the screen protector cutting machine, install PrinterServer on a computer. Then connect that computer, the printer, and the cutting ma...
Download and Connect the MTB-CUT 180T Pro Android App
The mobile app for the MTB-CUT 180T Pro is downloaded by scanning the provided QR code with an Android device. The MTB-CUT 180T Pro currently supports only an Android app. After installing t...
Internet Access Is Not Required for Normal Cutting
No. Mietubl screen protector cutting machines do not require an internet or Wi-Fi connection for normal cutting operations. The machines support offline use by combining a local database wit...
Compatible Printers for Mietubl Screen Protector Cutting
Yes, Mietubl screen protector cutting machines support Canon and Epson printers, subject to the documented model coverage and printing requirements. Canon G580 and G680 are the primary recom...