Restore Model Template Downloads on the 180T Machine
If the 180T machine cannot download model data templates, the usual cause is an unstable network connection rather than a hardware problem. Check the current connection, reconnect to Wi-Fi,...
Search
Find an article
Showing 135 results for "Network Troubleshooting"
Restore Connectivity by Testing the Wi-Fi Network List
Open the machine’s Wi-Fi list and confirm that Wi-Fi is enabled and nearby networks appear. If the list loads normally, forget your network and reconnect with the correct password. If the ma...
Restore M180T Template Downloads With a Stable Connection
If the M180T has trouble downloading model data or templates, connect the machine to another stable Wi-Fi network or use a mobile hotspot to provide internet access. The download depends on...
Restore Data Loading When the Machine Is Online
If the machine is connected to the internet but does not load data, cross-border network latency may be responsible. The machine combines offline and cloud-based data processing so that it c...
Resolve Error 1002 or Identify a Possible Mainboard Fault
Error 1002 indicates a serial communication error within the machine. First, reconnect the machine to Wi-Fi and restart it. If the error remains, restart the device again and, while it is st...
Connect a Non-Wi-Fi HP Printer Through PrinterServer
To connect an HP printer without Wi-Fi to the screen protector cutting machine, install PrinterServer on a computer. The computer running PrinterServer, the HP printer, and the cutting machi...
Printer Compatibility for the MTB-CUT 180TPro
Yes, the Mietubl MTB-CUT 180TPro screen protector cutting machine supports Canon and Epson printers. Support is conditional on the printer and cutting machine being connected to the same net...
When Repeated Login Prompts Coincide With Missing WiFi Networks
Open the machine’s WiFi list and check whether it can detect and display available WiFi networks normally. If no networks appear, the machine’s network/WiFi module may be faulty. Because thi...
Resolve the 180T Reconnection Message After Startup
If the 180T screen protector cutting machine displays a “Reconnect” or “Reconnection” message after startup, the documented likely cause is an issue with the system firmware. Upgrade the fir...
Resolve an Insufficient Balance Message With a QR Code Photo
If the machine shows an “Insufficient balance” message, contact the support team through WhatsApp and send a clear photo of the machine’s QR code. The team will use the QR code information t...
Resolve a Hardware Version Query Failure
If the device displays “Failed to query the hardware version,” restart the machine and check whether the message disappears. If restarting does not resolve the issue, the mainboard may be fa...
Restore Sensor Operation by Checking Auto-Loading and the Roller
If the machine’s sensor is not working, first open Settings and check whether “Auto-loading” is disabled. Enable it if necessary. Then try cutting any model and observe the roller. Normal ro...
Restore a Missing Mobile Model List in the Cutter APP
If the mobile model list is not displayed at all, clear the Cutter APP cache completely. After the system is restored, open “My” → “Data Update” to refresh all templates and system data. Thi...
Download and Set Up PrinterServer on Windows
Download PrinterServer directly from https://www.mietubl.com/app/printerserver.rar. Install the software on a Windows computer. For the supported setup, the Windows computer, printer, and cu...
Restore Phone Models by Refreshing Cutting Software Data
If a screen protector cutting machine cannot load phone models and displays a blank cutting page, clear the app’s cache or storage data and re-download the software data files. Keep the mach...
Recover Incomplete APP Data After K_data_update_error
If the machine displays “K_data_update_error,” open Mine → Data Update and download the data again. This error usually appears when APP data loading was interrupted after an upgrade, le...
Is the MTB-CUT 180T Ready for Your Store Counter?
Yes, the MTB-CUT 180T smartphone film cutting machine can be prepared for retail-counter use, provided the site has compatible power, stable 2.4G Wi-Fi, enough working clearance, and a defin...
Restore a Blank Product Page by Refreshing App Data
If the product page is empty or does not display properly, the issue is usually caused by incorrect language settings or a problem with the app’s data. Clear the app cache and reinstall the...
Connect a Printer Based on Your Cutting Machine Barcode
Start by checking the barcode on the back of your screen protector cutting machine. A barcode beginning with MT00 supports connection to Canon G580, Canon G680, and Epson L3250 printers when...
Connect a Non-Canon or Non-Epson Printer Through a PC
To connect a printer brand other than Canon or Epson to the screen protector cutting machine, install PrinterServer on a computer. Then connect that computer, the printer, and the cutting ma...